Need a part cut to a shape, not just a length? Our new CNC plasma table cuts custom profiles, holes and curves out of plate and sheet at our Apopka yard, with smooth edges and a slight bevel. Send us a drawing, a file, or a sketch on the back of an envelope, and we’ll cut it from steel we already have on the rack.
One piece or a full production run, we’ll cut it. Serving Orlando and Central Florida since 1979.
What Our CNC Plasma Table Can Cut
| Spec | Details |
|---|---|
| Table size | 6′ x 12′ |
| Thickness range | Up to 1″ thick |
| Materials | Mild steel (A36) plate and sheet, including diamond plate |
| Edge quality | Smooth edges with a slight bevel; light cleanup is usually all that’s needed |
| Files we accept | DXF files; simple parts like base plates, gussets and circles can be cut without one |
Not sure if your part fits? Send it over anyway. If plasma isn’t the right process, we’ll tell you and route it to saw cutting, torch cutting or the iron worker instead.
What People Bring Us to Plasma Cut
If it’s a flat shape cut from plate or sheet, it’s probably a plasma job. Common requests:
- Base plates and mounting plates with bolt holes for posts, columns and equipment
- Gussets, brackets and tabs for fabrication and repair work
- Trailer parts such as fenders, tongue plates and deck pieces
- Gate and fence parts, including decorative panels and hinge plates
- Fire pit rings and circles
- Signs, letters and metal art (ask us about your project)
- Replacement parts copied from a worn or broken original
Contractors, fabrication shops, trailer builders, sign companies and homeowners all use the same counter. A one-off part for a weekend project is a normal order here. Made from steel plate we stock.
How to Get a Plasma Cutting Quote
- Send the shape. A DXF file is fastest, but a dimensioned sketch or a photo of the original part with measurements works too.
- Tell us the material and thickness if your drawing or engineer specifies it. If nobody has told you a grade, most fabrication work uses A36 mild steel, which is what we stock.
- Tell us how many. One piece is fine. Larger quantities get price breaks.
- Pickup or delivery, and roughly when you need it.
Because we stock the steel, you don’t have to buy plate somewhere else and haul it to a cutting shop. The material and the cutting come on one quote. New to buying steel? See our guide on how to order steel.
Plasma, Saw or Torch: Which Cut Does Your Job Need?
You don’t have to choose. Tell us what you’re making and we’ll pick the process. For reference:
| Process | Best for | Edge |
|---|---|---|
| CNC plasma cutting | Custom shapes, curves, holes and profiles in plate and sheet | Smooth, slight bevel |
| Saw cutting | Straight cuts on pipe, tube, angle, beams and bar | Clean and square |
| Torch cutting | Breaking down heavy or oversized steel | Rough, for sizing only |
| Iron worker | Punching, shearing and notching heavy stock | Clean, fast |
Plasma isn’t a laser. For very tight tolerances or fine detail on thin material, ask us and we’ll tell you honestly whether plasma will get you there.
Turnaround, Pickup and Delivery
- Quotes: same day on most requests during business hours.
- Cutting: we turn plasma jobs around quickly; timing depends on the size of the run and whether material is in stock.
- Pickup: at our Apopka yard, 2401 Clark St. Call ahead and we’ll have it staged.
- Delivery: next day on most orders across Orange, Seminole, Marion, Osceola, Lake, Volusia, Eastern Polk and Brevard counties. Our trucks do not carry a forklift, so plan to have a way to offload heavier orders.
Want it primed, painted or galvanized after cutting? Say so on the quote and we’ll arrange it.
Se habla español. Our counter staff speaks English and Spanish.
Frequently Asked Questions
Do you offer CNC plasma cutting near Orlando?
Yes. We run a CNC plasma table at our yard in Apopka, just northwest of Orlando, and deliver across Central Florida.
Can I get just one part plasma cut?
Yes. There’s no minimum order. We cut single parts for repairs and one-off projects all the time, and larger runs get price breaks.
Do I need to bring my own steel?
No. We stock the plate and sheet, so the material and the cutting come on one quote. We cut from our own stock only.
How thick can you plasma cut?
Our table cuts plate up to 1″ thick. If your part is thicker than that, we can torch cut it.
What file types do you accept?
DXF files work best. A dimensioned sketch or a photo of the part with measurements works too.
How smooth are plasma-cut edges?
Our new table leaves smooth edges with a slight bevel. Most parts need little or no cleanup before welding or painting.
Is plasma cutting the same as laser cutting?
No. Plasma is faster and more economical for plate and thicker steel, while laser is better for very fine detail on thin sheet. Ask us and we’ll tell you whether plasma is the right fit for your part.
Ready to Get It Cut?
Send us the shape and how many you need. We’ll price the steel and the cutting together.
Call: 407-293-5788 (toll-free 800-299-5788)
Visit: 2401 Clark St, Apopka, FL 32703
Hours: Mon–Fri 8:00 AM – 5:00 PM (closed 11:45–1:00 for lunch)